Loewe MediaVision 3D Скачать руководство пользователя страница 16

Страница: 16 / 48

Start-up

Connecting to the mains supply

Plug the mains plug (page 7) into a mains socket 220-240V/50-60 Hz.

Switching on/off

Set the remote control for

MediaVision 3D

Mode by pressing

the

AUDIO

button briefly.

Your

MediaVision 3D

switches on. If you have connected a

Loewe TV set (L27xx/SL1xx/SL2xx) via HDMI, this will then switch
on as well. Otherwise, switch your TV set on and set the respec-
tive AV programme slot.

➠

If necessary, you will have to set the operation of the

Medi-

aVision 3D

for the AV socket used on your TV set (see, for

example, under "Operating additional devices" in the relevant
instructions for use of your TV set).

As soon as

MediaVision 3D

is ready for operation, the

operat-

ing display

lights up green (page 7).

To switch off the device, press the OFF/ON knob on the

MediaVision 3D

or once again on the

Assist

remote control .

Digital Link HD

With Digital Link HD, Loewe TV sets as well as other TV sets supporting the CEC
standard send the remote control signals via the HDMI connection from the TV set to
the

MediaVision 3D

. Select this function in the menu as described on page 20.

➠

The TV set must be switched on.

Select the AV programme slot for HDMI on the TV set.

As long as HDMI is selected as a programme slot, most TV remote control com-
mands (

ASSIST

in TV Mode) are communicated to the connected HDMI device.

However, the volume, sound ON/OFF and sound adjustment continue to respond
to commands from the TV set. The AUDIO commands (

ASSIST

in AUDIO Mode)

are not transmitted from the TV.

If your press the

TV button

for a longer time, you can toggle

between HDMI and TV operation. Briefly pressing the

TV button

switches back to TV Mode.

The

TV button

(press briefly) can be used to switch to the last

station viewed in TV Mode and quit the device control.

➠

A software update might be necessary for your Loewe TV set.

Please contact your dealer.

Digital Link HD (HDMI CEC)

:LWK 'LJLWDO /LQN +' /RHZH 79 VHWV FKDVVLV /[ VRIWZDUH 9 6/ [[

SL2xx) transmit the remote control signals signals via the HDMI connection from
the Loewe TV set to compatible accessory units, e.g.

MediaVision 3D

. Digital Link

HD is recommended if you wish to set up

MediaVision 3D

so that it is concealed

and the complete device control is to occur via the Loewe TV set.

First set up the HDMI CEC function for the

Assist

remote

control as described on page 15 with code 22 on the
required device button (e.g. DVD).

Then assign the Digital Link HD function to the HDMI interface
used on the TV set by pressing the button set above (e.g. DVD)
for 5 seconds.

A selection menu appears.

HINT
Here you select the device which you want to switch over your remote control
to with the key. After confirming the selection with OK all remote control
commands are passed on to the selected device via the TV set in future when
you press this key.

SELECT HDMI DEVICE FOR KEY

DVD

MediaVision

No device

Adopt

AUDIO

Select required unit (e.g.

MediaVision

Press

to confirm.

The signals of the

Assist