Loewe Digital Recorder+, Руководство по эксплуатации

Страница: 27 / 32

27 -
english
Scrambled stations
DVB Common Interface standard (CI)
If a programme has been recorded coded, the decoding process is carried
out automatically the next night in the standby mode (when timer data
settings do not differ). Please note that the TV set may not be switched
off at the mains overnight and that the CA module with SmartCard must
be inserted in the CI slot of the TV set.
If the recording is not decoded fairly soon after decoding, it may not be
possible to decode it at all. The longer the time between recording and
decoding, the greater the probability that the code is no longer valid.
➠
Scrambled hard disk recordings appear in the timer list until they are
descrambled (page 12).
➠
You can also start decoding manually (see page 20).
➠
Your programme provider may not support later (time offset) descrambling.
For queries concerning this, contact your provider.
You can have programmes from scrambled stations descrambled already
in DR continuous mode. This saves you having to decode directly recorded
scrambled programmes later. An appropriate CA module with SmartCard
must be inserted in the TV set’s CI slot for this.
➠
The playback of encrypted programmes is strongly dependent on which
CA module is used. The playback of encrypted recordings may sometimes
not be possible, or only to a limited extent.
Hint: When possible, record unencrypted programmes or unencrypt them
as soon as possible.
➠
Selection possibilities in the CA module menu (see operating manual of
the TV set) and performance capability of your CA module depend on the
type of module used and the installed software. Consult the manufacturer
of the module if you have any questions.