Loewe Digital Recorder+, Руководство по эксплуатации

Страница: 26 / 32

- 26
english
Other
Formatting the hard disk
You can format the integrated hard disk of the TV set, e.g. if hard disk
problems occur or if you want to delete the hard disk data quickly and
without complications.
Attention!
Formatting of the hard disk deletes all the data saved on it!
Call TV menu .
Select Settings ,
switch to the menu line below.
Select Miscellaneous ,
switch to the menu line below.
Select ,
OK activate.
Red button: Start formatting .
➠
First, the TV set is restarted. Then, formatting is
carried out.
END: Cancel the operation.
Character table
The characters available are language dependent.
The remote control key assignment for the menu language
English is
explained here.
Key $ ?([
1 1
2 A B C 2 - a b c 2
3 D E F 3 - d e f 3
4 G H I 4 - g h i 4
5 \„ €†#€
6 M N O 6 - m n o 6
7 P Q R S 7 - p q r s 7
8 T U V 8 - t u v 8
9 W X Y Z 9 - w x y z 9
0 0 [space] . / \ - + _ , ; : ? ! = & # % ~ @ $ * ´ | ( )
Further information
]"automatic time control
Your TV set can use the supporting technologies VPS (Video Programming
System) and automatic time control for recording a broadcast.
]" serves for monitoring the start and end time of the broadcast with
analogue stations. The VPS time indication is compared by the digital
recorder with the start time programmed by the user. If both times cor-
respond the recording is started. However, VPS is not supported by all
stations.
The
automatic time control assumes the corresponding monitoring of the
start and end time for #]) stations . The recording is started at the begin-
ning of the broadcast and switched off at the end, even if the start and/
or end time have been changed by the programme provider. Broadcast
interruptions are also taken into account. However, the automatic time
control is not supported by all stations.
Technical information
Switching off the TV set with the mains switch during operation can
cause damage to the hard disk file system and hence loss of the recorded
broadcasts. Always first switch your TV set to standby mode (press the on/
off button of the remote control or the switch-off button in the middle
of the operating eye of the TV set, see also operating instructions of the
TV set) before switching off at the mains switch.
ATTENTION
If the formatting of the hard disc is confirmed by pressing the button
then the TV switches itself off and then back on, and the formatting of the
herd disc starts automatically. Attention! This process will delete all data
stored on the hard disc.
Do you really want to format the hard disc?
Start formatting No, cancel the operation
Masthead
Loewe Opta GmbH
Industriestraße 11
D-96317 Kronach
www.loewe.de Printed in Germany
Published on 10/10-3.0 FP
© Loewe Opta GmbH, Kronach
ID: 3.9.0
All rights including translation, technical modifications and errors reserved.