Loewe AudioVision, Руководство пользователя

Страница: 17 / 33

Start-up
Menu Display
In the menu DISPLAY you can set the on-screen display of your AudioVision to
your TV set.
END
S
DISPLAY
TV Aspect
Display Mode
TV Output Select
4 : 3
16 : 9
Move Enter W Return
Call up Main Menu.
Select option DISPLAY .
TV Aspect
Select option TV Aspect .
4 : 3 Select this setting if a standard TV set with the
picture format 4:3 is connected.
16 : 9 Select this setting if a wide screen TV set with
16:9 TV Aspect is connected.
Confirm OK .
Close menu.
Display Mode
This option is available if in the menu TV Aspect you have
selected option 4: 3.
Select option Display Mode .
Letterbox Shots in wide screen format appear with a black bar
at the top and bottom edge of the screen.
Panscan The picture fills the entire screen but if necessary cuts
off areas at both sides.
Confirm OK .
Close menu.
TV Output Select
Select the video output signal depending on which video output
socket you use (page 11).
Select option TV Output Select .
RGB The TV set is connected to the socket EURO AV
YPbPr The TV set is connected to the OUTPUT
COMPONENT sockets
Confirm OK .
Close menu.
➠
Before changing this settings, make the necessary cable
connection so that you do not see a black screen.
➠
While using the HDMI socket this setting is not required.
17 -