18
Lift carefully the carrier and uncover the front control (Fig. 9).
Pay attention to the front control before removing the panel carrier. The front control is
fixed with 2 torx-screws (Fig. 9).
Pay also attention to the wiring of the inverter unit and FRC-board (Fig. 10 and 11).
Fig. 9 Fig. 10 Fig. 11
Following the holding plate must be unfastened, which is fixed with 4 torx-screws on
the Front frame (Fig.12).
Now you can remove the entire front frame with the removal tool (Fig. 13).
Fig. 12 Fig. 13