13 -
English
➠
The TV set must be equipped with an integrated digital multi-channel audio
decoder. If this has not been done at the factory, please consult your dealer
and ask them for the suitable Loewe upgrade kit.
You can connect the subwoofer either via an Audio-Link cable or via the
optional upgrade
Module Wirless AudioLink
wirelessly with a compatible
audio source (e.g. Loewe MediaVision 3D). If you connect the subwoofer via the
Audio-Link cable, install it with the 26-pole connector at the Loewe TV set and
at the subwoofer (socket
Audio Link
2
).
Connect the speaker cable to the speaker according to the corresponding instal-
lation instructions. One of the two wires is usually marked black. Connect these
wires marked black to the black screw terminal
Speaker Out
on the Subwoofer
Cabling of Loewe TV set (chassis L27xx/SL1xx) – Subwoofer Compact – speaker
Audio link cable
Connection
Loewe TV set (L27xx - SL1xx)
Loewe Subwoofer Compact
Mains cable
Compact
2
(see
À
gure below for connection diagram) and the black terminal
on the speaker. For this, turn the screw lock of the relevant terminal on the sub-
woofer anticlockwise about 5 turns. Guide the wire end into the screw terminal
from below and close the screw terminal by turning it clockwise. Connect the
wires marked black to the red terminals.
Use the mains cable provided to connect the 220 - 240 V socket
4
of the
subwoofer to a 220-240V 50/60 Hz socket.
Front
left
Front
right
34916_Loewe_Subwoofer_Compact_00_Buch_DE.indb 13
05.03.2012 15:27:20
