Loepfe A905262, Инструкция по установке

Страница: 9 / 26

9
3N1
FITTING 3N1
Fitting 3N1
Basic situation is a machine without any clearer system.
If there is one fitted to the machine, it must be removed before installing 3N1
Time instructions (based on 240 Rotors)
Time for Approx. man hours
Deinstallation of old system 14
Installation of 3N1 (full and basic) 36
Time for: Hours
Start up 5
Time for: (only one time) Hours
Teaching 8
Work on Informator:
Usually this should be done by the ACO responsible person in the mill.
Print or save report with all data.
!
Note: Start up and checks in the Diagnosis