Loepfe A905262, Инструкция по установке

Страница: 10 / 26

10
3N1
PREPARATION OF CABLING
SCU Side
Power supply 24 V
Ground
4K
LAN to Q-Board
The power supply must be installed by an electrician
Cabling SCU Front
1. Drill 4 holes Ø 5mm and deburr.
2. Install the power supply as shown. Mounting parts and
cable ties are provided
3. Fix the power input and power output cables with the ca-
ble ties to the power supply, as shown.
4. Make sure that the cables are tied at the cable mantle and
not at the wires.
Power Supply connections
Power Supply mounting
4x spring washer M4 DIN6798
4x screw M4x10 DIN7985
Preparation of Major Cabling