The following window will
appear.
The EC-12 module will be
detected automatically, press
next to continue.
Select the Lode (9600 baud) like
it is described in the picture
above and press Next.
Select an exercise protocol and
press Next.
Switch the blood pressure
device on when you are using
an external blood pressure.
device.
Press submit to save the
changes.
The software is now ready for
interacing with the ergometer.
3.3 - Ergometer setup
3.3 - Ergometer setup
The following protocol needs to be set in the Lode ergometer to communicate with the external
equipment.
Bicycle ergometer: Lode Protocol
The next chapters describe the procedures to setup these protocols depending on the type of
ergometer.
5/22
INTERFACE SHEET - LABTECH EC-12 R-S - CPET ERGOMETER / VERSION: 1.0 - 2016-01-11
