3 - Setup instructions Labtech EC-12 R-S
3 - Setup instructions Labtech EC-12 R-S
3.1 - Cable selection
3.1 - Cable selection
The required cable is a USB A-B cable (Lode art. nr. 930916)
Connect the cable to the ergometer as described in chapter "Hardware setup".
Connect the usb cable to the computer and let Windows install the drivers. If your driver is not found
you can download the FTDI driver here: http://lode.nl/en/article/ftdi-drivers/18
The driver is located under the services tab of the Lode homepage.
3.2 - Software
3.2 - Software
Setup
Setup
Turn on the PC and start the
program.
Select “Settings” icon as
indicated in the picture.
4/22
INTERFACE SHEET - LABTECH EC-12 R-S - CPET ERGOMETER / VERSION: 1.0 - 2016-01-11
