3 - Setup instructions - Cosmed Omnia
3 - Setup instructions - Cosmed Omnia
3.1 - Cable Selection
3.1 - Cable Selection
The required cable is a straight
RS232 cable (Lode art. nr.
930911) or USB A-to-B cable
(Lode art. nr. 930916)
Connect the cable to the
ergometer as described in
chapter "Hardware setup".
Connect the other end of the
Cable to the Cosmed Quark on
the AUX RS232 port (no.17 in
picture) if you are using an
RS232 cable or connect the USB A-to-B cable directly to the computer when using the USB A-to-B cable.
In case you are using the Cosmed K5 you may connect the RS232 or USB A-to-B cable to the computer
directly.
3.2 - Software setup
3.2 - Software setup
Select COSMED device to use for
the test (Main menu > Utility >
DeviceManager)
4/22
INTERFACE SHEET - COSMED OMNIA - CORIVAL CPET / VERSION: 1.0 - 2016-11-29
