1. Please Observe the Following
1
1.1 Emphasized Sections
Warning!
Refers to safety regulations and required safety measures that protect the operator or other
persons from injury or danger to life.
Notice
Gives recommendations for better handling of the unit during operation or adjustment as well as
for service activities.
1.2 For Your Safety
For safe and successful operation of the unit, read these instructions completely. If the instructions
are not observed, the manufacturer can assume no responsibility.
Always wear goggles when operating with pressurized air.
Observe general safety regulations for the handling of chemicals such as Loctite
®
adhesives
and sealants. Observe the manufacturer’s instructions as stated in the Material Safety Data
Sheet (MSDS).
While under warranty, the unit may be repaired only by an authorized Henkel Loctite
service representative.
1.3 Unpacking and Inspection
Carefully unpack the valve and examine the items contained in the carton. Inspect the valve for
any damage that might have occurred in transit. If such damage has occurred, notify the carrier
immediately. Claims for damage must be made by the consignee to the carrier and should be
reported to the manufacturer.
1.4 Items supplied
Micro Needle Valve
Accessory Pack consisting of:
Sample Needle Kit
Sample Fluid Line, 6 Ft.
AirLine Tubing, 5 Ft.
Fluid Fitting
1
⁄
8
"NPT x
1
⁄
4
" tube
Operation Manual
1.5 Features
• Provides extreme accuracy of drop size
• Shot sizes down to a fraction of a microliter
• Compact design allows for mounting flexibility
• Secondary seal/shut off for easy dispense tip changes
• Adaptable to optional reservoirs based on package size
• Syringe barrels mount directly onto valve
• Used in semi or fully automatic process applications
☞
☞
