Memory Card
(continued)
Page Tree
z
Log Switch
z
NMEA Items
z
File Size
When the card is
correctly inserted
z
Format Card
z
Remove Card
z
On or Off
z
GGA
z
GLL
z
GSA
z
GSV
z
RMC
z
VTG
z
ZDA
z
Card Size
z
128KB
z
512KB
z
1024KB
z
2048KB
z
Select proper size to log the track data.
z
File sizes can be set:
128, 512, 1024, 2048 KB, or card size
z
When CARD SIZE is selected, the system will store the
data on the card continuously until the card memory is
full.
If the card is properly inserted, the following pages will be shown:
z
Format Card:
Format the card to FAT16 file system.
Note:
All data on memory card will be erased when the Format Card has been selected.
z
Remove Card:
Before taking out the memory card, execute this function to save the file,
or the file could be damaged.
Note:
To prevent data lost on the memory card,
GT-11/BGT-11
will store the data up to the file
size selected, and generates a file automatically. And then, start again to store the data
until file size selected has been reached. A new file will be generated accordkingly.
Therefore, it is safer to select small file size. However, it also dependents on
post-processing requirement to select file sizes.
GT-11/BGT-11 Owner’s Manual Version 1.0
36
