www.yachtrouter.com
12
13.5. Power on Yacht Router
Once you installed Yacht Router 4G Control Software or connected Touch Screen Controller 4G you can power on Yacht Router.
After you turn in on, power LED indicator will light up and you will hear few beeps from Yacht Router. After about half a minute
of boot period Yacht Router is ready for use. You will know it is ready once you can find
Vessel Network 1,
Vessel Network 2
and
Vessel Network 3
wireless network after network scan on your computer, iPhone, iPad or Android device. Connect your device to
Vessel Network 1, Vessel Network
2
or
Vessel Network 3
wireless network.
Initial password for
Vessel Network 1
,
Vessel Network 2
or
Vessel Network 3
wireless network is: 12345678
IMPORTANT: Be sure your computer is connected only to WIFI Vessel Network. Disconnect all other connections (e.g.
LAN). Check that the computer is set to obtain IP address automatically (DHCP enabled). On the following link you can
find instructions how to do that:
http://windows.microsoft.com/en-US/windows7/Change-TCP-IP-settings
