- PAGE 3 -
FORM 77027 Rev. B
5/99
Pro Access System
BATTERY POWERED LOCK WITH ACCESS CONTROL
INSTALLATION INSTRUCTIONS
To battery powered
locking device
Pro keypad \ controller
Plug in connec-
tors
Battery pack
BATTERY OPERATED
1. Plug keypad into
battery pack 4 pin con-
nector.
2. Plug battery pow-
ered locking device into
battery pack 2 pin con-
nector.
To 12\24 VDC power
supply
To hard wired
locking device
Pro keypad \ controller
Position switch
towards connector for
a fail safe lock.
Position switch away
from connector for a
fail secure lock.
HARD WIRED
1. Plug keypad into cir-
cuit board.
2. Apply 12 or 24 VDC
to red and black wires.
Be sure to observe
polarity.
3. Connect blue and
brown wires to locking
device power. Again
be sure to observe
polarity.
4. Position switch as
shown for fail safe or
fail secure locking
devices.
NOTES FOR BATTERY AND HARD WIRED SYSTEMS
1. The maximum current that can be put through the hard wired Pro Controller is 5 amps.
2. Battery life of the battery operated Pro Controller is 80,000 cycles.
BLACK (-)
WHITE (+)
