390/390-2 DEL
MAGNETIC LOCKING SYSTEM
15
Form 39990 Rev. E
09/23/2005
ANTI TAMPER SWITCH - IMPORTANT NOTE:
The electronic 390 models come standard with the ATS
(Anti Tamper Switch). When the cover is removed, the
alarm will sound. It can be reset either by momentarily
shorting terminals 17 and 18, which is the reset input, or
by entering a valid keypad code or iButton. If power is
applied while the cover is off, the alarm will not sound.
Putting the cover on or depressing the ATS switch will
arm it. If the ATS switch is not working properly, check
the setting of the jumper (see pages 8 & 10).
ANTI TAMPER
SWITCH
PLUGTOUCH READER INTO PC BOARD AND SECURE LOCK COVER
TERMINALS
17&18
ATS
JUMPER
MASTER
MASTER
(OR SINGLE LOCK)
SLAVE
WIRING TO PASS THROUGH FRAME
PLUG THIS END
INTO BOARD AS
SHOWN
PLUG CABLE ENDS
INTO PC BOARDS AS
SHOWN
