WARRANTY
COMPLIANCE STANDARDS
Lock 'n' Charge Technologies warrants the product to be free of defects in design, materials, assembly and craftsmanship
for a period of twelve months from the date of purchase to the original retail purchaser. Evidence of original purchase will
be required to obtain warranty service.
In the event that a defect, malfunction or failure occurs or is discovered during the warranty period, Lock 'n' Charge
Technologies will repair or replace, at its option, the products which in the reasonable judgment of Lock 'n' Charge
Technologies are deemed defective. All transportation costs shall be borne by the owner and the risk of loss shall be upon
the party initiating the transportation.
The warranty does not apply to any product that has been subject to misuse, tampering, neglect, or accident or as a result
of unauthorized alterations or repairs to the product. The warranty is in lieu of all warranties expressed or implied,
including the implied warranties of merchantability and fitness for a particular purpose which are expressly excluded or
disclaimed. In no event will Lock 'n' Charge Technologies, their directors, officers, employees, or agents be liable for any
harm, consequential, incidental, third party, special or indirect damages whatsoever arising out of the use or inability to
use the products even if Lock 'n' Charge Technologies has been advised of the possibility of such damages. Lock 'n' Charge
Technologies' obligation is strictly and exclusively limited to the replacement or repair of any defective products. Some
states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion
may not apply to you.
ECO Safe Charge™ conforms to US and Canada Safety Standards: UL1363, UL498
The Surge protection components are UL listed to UL1449
The EMI/RFI components are UL listed to UL1283
The remote and ECO Safe Charge™ power strip conform to part 15 of FCC rules with limits for a Class B digital device.
These limits provide reasonable protection against harmful interference, and the operation is subject to the following:
1.
This device may not cause harmful interference
2.
This device must accept any interference received, including interference that may cause undesired operation
Both the remote control and the power strip are designed with sophisticated protocols to prevent undesired operation in
normal use.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the device.
ID: Y6FELE1906
WEEE Directive & Product Disposal
At the end of its serviceable life,this product should
not be treated as household or general waste. It should
be handed over to the applicable collection point for
the recycling of electrical and electronic equipment,
or returned to the supplier for disposal.
