SECTION 3.6
19
3.6 Adding a Fingerprint (Continued)
Scan your finger by lightly placing your designated finger on the sensor until
you hear a beep. Lift your finger and repeat the process slowly until the
digit
“6”
shown on the screen becomes
“1”.
If you have successfully
scanned and registered your fingerprint, you will hear a long beep, and the
Bluetooth icon will
flash green.
PASS
will show on the keypad and press
OK
to exit. If you did not success-
fully register your fingerprint,
FAIL
will show on the keypad. If
FAIL
is
displayed, press
OK
to return to the previous screen to rescan your finger.
For instructions on scanning an optimal fingerprint, please proceed to
Section 3.7.
OK Button
NOTICE
Please make sure your fingers are clean from dirt and oils
before scanning your fingerprint. Make sure the sensor is
also clean by taking a soft cloth and wiping the surface.
Содержание Secure LUX
Страница 1: ...MORTISE EDITION USER MANUAL LUX MORTISE LOCK SECURE...
Страница 23: ...SECTION 3 7 21 Top View Side View 3 7 Fingerprint Scanning Directions Continued OK OK X X X X Correct Incorrect...
Страница 43: ...UMPGD82920190429 We re here to help help lockly com https lockly com help SECURE...