2.7 Low Battery
SECTION 2.7
When the battery is in seriously low condition, Lockly will make continuous beeping sounds in addition
to the flashing low battery icon on the touch screen. You should replace batteries
immediately
to
avoid your smart lock from
shutting down.
When your smart lock low-battery warning alert finally dies, you will have 3 chances to unlock your
smart lock either by a password, APP or fingerprint. If the unlock was successful, the low-battery
warning alert will be on for 1 minute. After which, the smart lock will go to dead battery mode and
will lock auto lock in 5 seconds and the screen will display a low-battery icon.
Dead Battery
Condition
Indicator
Solution
Low Battery
Battery Icon on the display
keypad will light up to indicate
low battery.
Replace batteries immediately to
avoid battery failure. Lockly Secure
can still operate up to 300 cycles
in low battery condition.
When there is no display
and sounds; and screen is
non-functional.
Replace batteries immediately.
Supplied physical backup keys
can be used to unlock the door.
Alternatively, use a 9V battery as
shown below to temporarily activate
the lock.
Your Lockly will automatically detect battery
polarity. So hold your 9V battery lead in place
against bottom of the Lockly to
temporarily
activate the screen to enter your
Access Code
.
Be sure to hold the 9V battery against the
contact points located at the bottom of the
lock until you have successfully unlocked your
door with your
Access Code
. Once unlocked,
batteries should be replaced immediately.
7
9V Battery
-
+
