SECTION 3.2
3.2 Adding a Fingerprint (Continued)
Scan your finger by lightly placing your designated finger on the sensor until you hear a beep. Lift
your finger and repeat the process slowly until the digit
“6”
shown on the screen becomes
“1”
.
If you have successfully scanned and registered your fingerprint, you will hear a long beep, and
the Bluetooth icon will
flash green
.
PASS
will show on the keypad and press
OK Button
to exit. If you did not successfully register
your fingerprint,
FAIL
will show on the keypad. If
FAIL
is displayed, press
OK Button
to return to
the previous screen to rescan your finger.
For instructions on scanning an optimal fingerprint, please proceed to
Section 3.3
.
OK Button
NOTICE
Please make sure your fingers are clean from dirt and oils before scanning
your fingerprint. Make sure the sensor is also clean by taking a soft cloth
and wiping the surface.
12
