19
Step 7
PREPARING DOOR SENSOR FOR INSTALLATION
Part
AA
- Wired Sensor
Part
AB
- Sensor Magnet
IMPORTANT: Gap must be less than 3/4” when installed.
Do not mount (install) door sensors yet. You will install in step 9.
When installed on door, the distance between the wired sensor and sensor
magnet must be less than 3/4” in order for the sensor to work. If door frame
is higher than door, add included foam pads to level parts
AA
and
AB
with each other as much as possible.
Lockly door sensors comes in Grey (PGA061) and Matte Black (PGA062)
that can be ordered through our customer hotline: (669) 500-8835 or by
email: [email protected]
TIP
：
About door sensors
Door sensors provide real-time door condition status, such as the ability to verify if the door is
securely closed. It also sends push notifications to your phone whenever your door opens and
enables voice control.
Lockly Guard
™
Duo (679D) comes with a pre-wired door sensors consisting of two parts:
Removal of Sensor (optional)
There may be circumstances where the sensor cannot be installed because of molding/door
limitations or is not aesthetically desirable. The sensor wired to the lock is removable by carefully
pulling its connector from the circuit board.
If removed, some features and functionality will
not be available, such as real-time condition status.
