3
www.Lock4Safe.com
Technical Manual –
Entry Units
with LCD display
Standard mounting
(recommended)
• Clean the surface of the recessed area for the
keypad from dust and grease/oils.
• Remove protective layer from the backside of the
keypad, align the membrane at the top and glue it
to the surface.
• Feed the entry unit cable through the hole and
tighten the entry unit with the M4 screws supplied.
Do not tighten the screws yet so that the entry
unit can still be optimally aligned.
• Align entry unit and tight the screws.
• Prepare the mounting and cable /spindle holes
on the safe door.
• Deburr the cable hole well so that the cable can
cannot be damaged.
2
1
4
• Mount Lock(s) and other devices according to their
technical manuals.
• Perform a full system test.
3
11 mm
41,50 mm
M4
