background image

2

Hazard definitions

The following defined terms are used throughout this manual to bring attention to the presence of hazards of various risk levels 
or to important information concerning the life of the product.

 

CAUTION

 CAUTION

 NOTICE

DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious 
injury.

WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious 
injury.

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate 
injury.

CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not 
avoided, may result in property damage.

NOTICE indicates special instructions on installation, operation, or maintenance that are important but not 
related to personal injury or property damage.

Contents

CONTENTS .......................................................................  2

HAZARD DEFINITIONS ...................................................  2
1.  GENERAL INFORMATION ........................................  3
     Tank construction ...................................................... 3-4 
2.  INSTALLATION ...........................................................  5
     Transporting and unpacking the unit ............................  5
     Examining the unit .......................................................  5
     Anchoring the unit .........................................................  5
     Recommended service clearances  .............................  5
     Connecting the hot water source ............................... 5-6
     Cold water supply .......................................................... 6
     Hot water outlet ............................................................  6
     Mixing valve ..................................................................  6
     Aquastat / bulbwell ........................................................ 7
     Piping the relief valve ...................................................  7 

     Drain .............................................................................  7
     Completing the installation ...........................................  7 
3.  OPERATION ................................................................  8
     Startup procedure .......................................................... 8 
     Shutdown procedure ...................................................... 8 
4.  INSPECTION ...............................................................  9
5.  MAINTENANCE .........................................................  10
     Flushing the tank ........................................................  10
     Cleaning the tank ................................................... 10-11
     Magnesium anode rod inspection ...............................  12
     Water piping and valve replacement ..................... 12-13
     Notes.......................................................................13-15
Revision Notes ..................................................  Back Cover

Hot Water Can Scald!

• 

Water heated to temperatures for clothes washing, dish washing, and other sanitizing needs can 

 

scald and cause permanent injury.

•  Children, elderly, and infirm or physically handicapped persons are more likely to be 
 

permanently injured by hot water.  Never leave them unattended in a bathtub or shower.  

 

Never allow small children to use a hot water tap or draw their own bath.

•  If anyone using hot water in the building fits the above description, or if state laws or 
 

local codes require certain water temperatures at hot water taps, you must take special 

 precautions:
 

 

• 

Use lowest possible temperature setting.

 

 

•  Install some type of tempering device, such as an automatic mixing 

 

 

 

valve, at hot water tap or water heater.  Automatic mixing valve must be selected and 

 

 

 

installed according to valve manufacturer’s recommendations and instructions.

• 

Water passing out of drain valves may be extremely hot.  To avoid injury:

 

• 

Make sure all connections are tight.

 

• 

Direct water flow away from any person.

Protection Must Be Taken Against Excessive Temperature and Pressure!
--Installation of a Temperature & Pressure (T&P) relief valve is required.

 

WARNING

 DANGER

Содержание Thermal-Stor 100 Series

















Отзывы: