LOBSTER R2B1, Инструкция по эксплуатации

Страница: 7 / 35

ENGLISH
7
⚠ WARNING
Prohi
bition
39. Do not direct the tip of the riveter to yourself or another person.
・ Failure to follow this instruction may lead to an injury when a rivet
unexpectedly springs out .
40. Do not use this machine without attaching the mandrel collector
(tank for used mandrel).
・ Failure to follow this instruction may lead to an accident or injury when the
mandrel of a rivet bursts out.
41. Do not rivet a rivet with a diameter other than the applicable rivet
diameter.
・ Failure to follow this instruction may cause an accident or injury .
42. Do not look into the hole of the nose piece or eject pipe.
・ The mandrel of a cut rivet may spring out, possibly causing an injury.
43. When smoke is generated, do not inhale the smoke.
・ Failure to follow this instruction may harm your body .
44. Do not cover the ventilation hole.
・ Failure to follow this instruction may cause you to be burned or cause this
machine to be abnormally heated, possibly leading to fire .
45. Do not allow the hot wind from the ventilation hole to directly blow
to your skin.
・ As the air becomes hot, you may get burned.
46. Do not touch a metal part immediately after work.
・ As the air has become hot, you may get burned.
⚠ CAUTION ⚠ CAUTION
Compul
sory
1. Carefully take care of the charger.
・ Periodically inspect the power cable of the charger, and if it is damaged,
request the store where you purchased this machine or us for repair.Failure
to follow this instruction may cause an electric shock or short circuit.
・ If you use an extension cord, periodically inspect it, and if it is damaged,
replace it with a new one. Failure to follow this instruction may cause an
electric shock or short circuit, possibly leading to fire .
2. If you do not use the charger, disconnect the power plug of the
charger from the receptacle.
・ This prevents accidents such as electric shock and fire.