ENGLISH
20
If about half of the capacity of the mandrel collector is filled
with mandrels, remove the mandrel collector and dispose of
the mandrels contained in it.
( Refer to Steps and in “Preparation before Use” on
page 13-14.)
⚠ CAUTION
If mandrels are excessively accumulated in the collector,
the discharge of mandrels is obstructed, which may lead to
a reverse flow or a failure of the riveter.
Dispose of the mandrels in the mandrel collector little by
little as much as possible.
１
3
１
4
Rivet body diameter
Capacity [pcs.]
Disposal guideline [pcs.]
φ 2.4
700
350
φ 3.2
450
250
φ 4.0
230
150
φ 4.8
200
100
Approximate Collector Capacity
※
Capacity is approximate.
It varies depending on the mandrel diameter and length of the rivet used.
１
9
<When you want to eject the mandrel forward>
If you wish to eject the mandrel forward after riveting, use the nosepiece of the
"Parts List Option (Refer to P.29)" and riveting. Then, move the machine to the
position where you want to eject while pulling the trigger switch and release the
trigger switch.
Содержание R2B1
Страница 28: ...ENGLISH 28 Parts table Parts table 1 2 3 4 5 14 6 7 8 9 10 11 12 13 ...
Страница 33: ...ENGLISH 33 ＭＥＭＯ ...
Страница 34: ...ENGLISH 34 ＭＥＭＯ ...
Страница 35: ...ENGLISH 35 ...
