8.
If the tool makes an abnormal sound during operation, discontinue use
immediately. Return the tool to Fascut Industries for repair.
9.
Do not add hydraulic oil if the tool is warm or immediately after heavy duty
operation. Oil will be under a slight pressure when tool is warm.
10.
Avoid skin contact, eye contact and inhalation or ingestion of hydraulic oil.
11.
Handle tool with care.
This rebar cutter is composed of many precision parts, so do not drop or handle
roughly. If the tool has been dropped or has received a sharp blow or otherwise
damaged in any way, send it to Fascut Industries for repair.
12.
Never operate the tool resting upright on its motor.
13.
Be sure to hold the tool tightly during operation.
Parts Identification
1 – Cutter Head
7 – Oil Cap
13 – M5 Hex Key
2 – Cutting blades
8 – Motor
14 – M6 Hex Key
3 – M6 Cap screw
9 – Brush Cap
15 – Open end wrench
4 – Adjusting Screw
10 – Power cord
16 – Spring Plate
5 – Piston
11 – Trigger Switch
17 – Handle
6 – Release Valve
12 – Switch Lock
Check Points for Operation
#1 – Safe Work Area Environment?
Never use this power tool in the
Using this power tool in rain or a wet
presence of flammable liquids or
location may result in a risk of
gases. As with all power tools,
electric
shock. sparks are generated and can be
very
dangerous.
#2 - Are Cutting Blades sharp and tight?
Make it a habit to double check that the cutting blades are sharp and securely
tightened before operation. Tighten blade securing bolts if they are loose. Be
sure to unplug the tool before servicing.
Содержание EH-19PCU
Страница 10: ......
