Author: JJ Contributors: Date: 3/18/2022 Revised:
TS- My Machine Won’t Hold a Charge (Grand Machines)
Troubleshooting Instructions
Main Power Switch Red wire to Bat Pos (battery positive) on
circuit board. J8 and J7 locations are both the same current).
1.
Check to make sure the XLR charging
wires are not loose (either on the circuit
board and reset switch where they
connect, or where they come out of the
XLR charging port). If the XLR charging
port is broken (meaning the wires coming
from the charging plug, not the ends that
connect to the panel and reset switch),
then a new E886 Charging Port Plug is
needed.
If the Power Wires are connected properly, and the
XLR port is secure, please move onto Step 5.