Phone: 800.526.4041
Fax: 818.764.6061
Replacing and Installing a Arc Gear on the Platform.
Repair Instructions
Screw from the Arc Gear poking through the Arc Gear
Shield (marked in Orange)
Step 3.)
Screw on the 2 Kep Nuts to secure the shield to
Arc Gear in place.
Kep Nuts holding shield to Arc Gear (marked in Green)
4
Re-attaching the Platform the Chassis
Step 1.)
Carefully line up the platform with the
Chassis, so that the Rack Gear teeth, fit in-between
the Spur Gear teeth.
(See picture below).
Step 2.)
Push the ½ inch platform bolt thru the
bottom of the platform, so that the threaded edge is
popping out of the top/middle of the chassis.
Rack Gear teeth lining up
with Spur Gear teeth.
