Phone: 800.526.4041
Fax: 818.764.6061
Replacing and Installing a Arc Gear on the Platform.
Repair Instructions
Platform Being rested feet
down- with magnet facing up.
3
Un-installing and Installing the Arc Gear
Step 1.)
With the Platform on the 4 rubber feet, go
to where the Arc Gear is located, and unscrew the 2
screws holding the Arc Gear (and Arc Gear Shield)
in place. Please note you will need to also grab onto
the 2 kep nuts holding the shield in place on the
opposite side of the platform.
Arc Gear screw holes (marked in red)
Arc Gear screw holes (marked in
red)
Kep Nuts holding shield to Arc
Gear (marked in Green)
Screw from the Arc Gear poking
through the Arc Gear Shield
(marked in Orange)
