SW500 Wired Scale Systems, Users
Rev E,October, 2016
Page 7 of 36
Setup
Note: This manual covers the operation of the RFX indicator with different RFX
scales. If you have the Precision Hub Plates, refer to the Hub Plate users manual
for proper set-up instructions and to the “Quick Start” sections that follow this
section.
NOTE: Motorcycle mode: For motorcycle scale sets, use the LF (red cable) pad
for Front, and the LR (white cable) for Rear. Refer to the “Special Display” section
for motorcycle operations.
System
indicator
System setup configuration
1. Place the four pads near their appropriate car tire: LF by left front, RF by right front
and so on.
2. Connect one end of each cable to a pad: LF-Red cable, RF-Green cable, LR-White
cable, RR-Black cable.
3. Turn the control box on.
4. If the pad readings are not zero, press the ZERO key.
5. Jack the car onto each pad.
