SW500 Wired Scale Systems, Users
Rev E,October, 2016
Page 25 of 36
Recall Baseline Setup
To recall one of the 99 setups, press a number key 0-9. A menu will be displayed
similar to the example below:
1.
Enter the number of the target location you want to use and press
STORE/ENTER.
2.
The scale automatically switches to TARGET mode to display the stored setup.
3.
At this point you may hit ACTUAL to view the current weights on the scales or
COMPARE to display how close your current weights are to the target weights.
Clear Baseline Setup
To clear one of the setups, press CLEAR. The following screen will be displayed:
1. Enter the memory spot you wish to clear and press “Store/Enter” key.
Note: To exit, press the ACTUAL key.
Note: This operation will clear the baseline setup (target weights) in the memory
location you select, but will not clear the current targets.
RECALL SETUP FROM
MEMORY# 06
(HIT ACTUAL TO EXIT)
CLEAR SETUP FROM
MEMORY #1-99: 01
(OR ENTER ‘00’ TO
CLEAR ALL SETUPS)
