LMT FETTE T18F Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 60

LMT FETTE T18F Скачать руководство пользователя страница 54

Operating Manual
Tangential Rolling System T18F - T27F

50

www.lmt-fette.com

13

Service information

Service hotline and e-mail address

Use our service hotline: +49 (0) 41 51 12-391 or US: 1-800-225-0852
or write to [email protected]

We can provide you with help and useful information on our products.

Maintenance and repair

The maintenance and repair of your rolling tools can either be performed at the
LMT Fette head office in Schwarzenbek or at one of our worldwide representatives
by experienced personnel. We recommend that you entrust this work to us. Trust the
expertise and experience of the manufacturer of your tools and only use original spare
parts. This way you can always ensure the proper functioning of your precision tool
and your production.

Technical field staff

Our technical field staff have decades of experience in the use of rolling tools. They
are available to offer support and training when you use your new precision tool for the
first time.

… giving you the freedom to concentrate on your production!

Engineering

When planning the manufacture of your threads and profiles and introducing modern
and rational production processes you can rely on the know-how of our technical field
staff and the expertise of our development and construction departments.

Our state-of-the-art “Engineering” service is designed to secure your benefits and
success!

Seminars and training

We offer intensive personnel training programs at your premises, tailored to meet your
special requirements. Using the state-of-the-art tools, seminars and product training
sessions take place at our head office and at our global subsidiaries and representa-
tives. These training sessions are held by our technical customer service and the LMT
Academy. For more information, please visit

http://www.lmt-tools.com

→

Downloads

→

Seminars

.

The product range

We offer our customers the world’s most extensive range of rolling tools for the
production of external threads and profiles. In addition, we stock the largest range of
precision tools for the production of internal and external threads in different designs
such as solid steel, solid carbide with indexable inserts and with different wear protec-
tion surfaces:

LMT_Bedienungsanleitung_T18F_T27F_e.indd 50

02.08.11 17:40

«
...
52
53
54
55
56
...
»

Содержание FETTE T18F





























































Отзывы:

Нет отзывов