www.lmicorporation.com 12
SECTION 8:
OPERATING PROCEDURES
8.1
ON/OFF
To turn on the indicator, press and release the ON/OFF
button. To turn off the indicator, press and release the
ON/OFF button. The digital indicator will turn on in the
same mode it was in before it was turned off and the
selected values for tolerance and preset will be kept. Except
when in a setup mode, such as the mode for setting the
preset value, if the digital indicator is turned off, then the
digital indicator will enter the mode it was in before it
entered the preset value mode.
8.2
CH/- SIGN AND COUNTING DIRECTION
To change the positive and negative value, press and release the +/- button and the sign will change
to the left of the value. This will also change the counting direction the indicator measures and the
arrows indicate the direction of increasing values.
8.3
CHANGING UNITS (in/mm)
To the right of the numbers is the unit of measurement. To change the unit of measurement,
press and release the in/mm button.
NOTE
: mm/in have the maximum of six digits.
This picture illustrates the indicator in
mm Mode
This picture illustrates the indicator in
inches Mode
When the arrow is pointing
up, the values are increasing
as the spindle moves inward.
When the arrow is pointing
down, the values are
increasing as the spindle
moves outward.
OFF
ON
