LMI Technologies Gocator 2300 Series Скачать руководство пользователя страница 231

Страница: 231 / 431

Gocator 2300 & 2880 Series

Gocator Emulator • Working with Jobs and Data • 231

Do one of the following:

Click

Discard

to discard any unsaved changes.

The Upload menu appears.

Click

Cancel

to return to the main window to save your changes.

In the Upload menu, choose one of the following:

Upload

: Unloads the current job and creates a new unsaved and untitled job from the content of the

replay data file.

Upload and merge

: Uploads the replay data and merges the data's associated job with the current

job. Specifically, the settings on the

Scan

page are overwritten, but all other settings of the current

job are preserved, including any measurements or models.

Navigate to the replay data to upload from the client computer and click

The replay data is loaded, and a new unsaved and untitled job is created.

Replay data can be exported using the CSV format. If you have enabled

Acquire Intensity

in the

Scan

Mode

panel on the

Scan

page, the exported CSV file includes intensity data.

To export replay data in the CSV format:

Click the Export button

and select

Export Range Data as CSV

In Profile mode, all data in the record buffer is exported. In Surface mode, only data at the current
replay location is exported.

Use the playback control buttons to move to a different replay location; for information on playback,

Содержание Gocator 2300 Series
















































































































































































































































































































































































































































Результаты поиска

Содержание Gocator 2300 Series

Отзывы:

Бренды по названию

Популярные бренды

LMI Technologies Gocator 2300 Series, Руководство пользователя

Результаты поиска

Содержание Gocator 2300 Series

Отзывы:

Бренды по названию

Популярные бренды