Installation
After successfully completing registration please wait 5 minutes
for your account to be activated before you start installation.
!
The Personal Care Alarm box is very simple to install, connection to the telephone network is
via the telephone lead/adaptor. The Personal Care Alarm box should be connected to the
master telephone socket in the home. It should also be positioned as centrally as possible
and positioned as far away from any interfering equipment such as mobile equipment,
wireless headphones, DECT (Digital Enhanced Cordless Telecommunication) phones, DECT
base stations as such equipment may have an adverse effect on the range. Reinforced
concrete walls may also decrease radio coverage.
Connect the telephone cable (supplied) into the TEL socket located on the back of the
Personal Care Alarm box.
Put the other end of the telephone cable into the telephone adaptor provided.
Place the existing telephone cable into the other side of the telephone adaptor.
Now plug the telephone adaptor into the main telephone socket in the wall.
Note: Please pick up your telephone handset to ensure you have a dial tone.
Connect the power supply cable (supplied) into the POWER socket on the back of the
Personal Care Alarm box (see image on next page).
Plug in the power supply into the mains socket. Then switch the mains socket on.
Note: If you have a broadband filter in your telephone socket then you will need
to plug the supplied adaptor into the phone part of your broadband ADSL filter
to enable it to work (see image on next page).
Switch Personal Care Alarm box on.
The power light on the Personal Care Alarm box will now light up green.
5
6
