23
14.
Functionality test
12.
Rear panel installation
13.
Strike installation
1. Keep the door half-open while testing
2. Check correct operation of:
• Press down on the front handle, the dead-bolt and latch-bolt remain in place on lock status
• Unlock the device and press down on the front handle, the dead-bolt and the latch-bolt
retract in unlock status
• Lift the front handle, the dead-bolt is released to lock the door in any status
• Press the rear handle down, the dead-bolt and latch-bolt retract to any status
• Lift the rear handle, the dead-bolt is released to lock the door in any status
1. Open the battery cover, located in the upper part of the rear panel
2. Plug the connection cable to the corresponding interface of the rear panel, then store
the excess cable inside the hole of the door
3. Align and join the rear panel to the back of the door, taking the iron spindle as a reference
and fixing it with the connexion screws
4. Insert 4 AAA batteries in to the battery compartment and place the cover again
Door frame
Strike plate
Screws for
strike plate
Strike box
3. Safety Lock: When inner security lock is placed in the lock position, only the administrator
will be able to open, the other users will not be able
