1. Safety instructions
Before operation
•
Read the Instruction Manual carefully before use.
•
Ensure that only trained staff use the instrument. The instrument may only be opened by a
qualified and trained technician.
•
Make sure the socket is earthed before use.
•
Set the instrument on a stable, clean, dry, non-slip and fireproof surface.
•
Do not operate in hazardous areas.
•
Before each use, check the instrument for damage. Do not use damaged components.
•
The operation voltage noted on the label must match.
•
Always disconnect the plug before fitting accessories.
•
When working, wear personal protection to avoid the risk from splashing of liquids and
possible glass breakage which can result from mechanical vibrations.
During operation
•
Gradually increase the speed, reduce the speed if:
- the stirring bar breaks away due to high speed, or
- the instrument is not running smoothly, or
- the container moves on the base plate.
•
Temperature must always be set at least 25 °C lower than the fire point of the media used.
•
Be aware of hazards due to:
- flammable materials or media with a low boiling temperature, or
- overfilling of media, or
- the container is unsafe.
•
Do not work with defective parts.
•
When the external temperature sensor is required, the tip of the measuring sensor must be at
least 5 - 10 mm from vessel bottom and wall.
•
The instrument can only be disconnected from the main power supply by pulling out the
main or the connector plug.
•
Keep a good, clear distance around the instrument (at least 10 cm from wall/other equipment).
•
Keep away from high magnetic field.
