LLG uniPERISTALTICPUMP 3, Инструкция по эксплуатации

Страница: 3 / 12

INSTRUCTION MANUAL
3
Warning!
• The tubing may have cracks due to wear. This could result in the overflow of fluid from
tubing and may cause damages, so the user must check regularly and change tubings
in time.
• Connect the power cable directly to the wall socket and avoid using an extension cable.
• If the power line or plug is damaged, please hold the plug to unplug it, not hold the
line.
1. Product Introduction
LLG-uni PERISTALTICPUMP 3 uses a step
motor, has a small size and low noise
emission. It adopts an OLED high-definition
display and has an external control
interface for remote control. The pump can
communicate with computers and is used
with a variety of analytical instruments.
LLG-Labware offers 3 different PharMed
®
tubings with an inner diameter of 3,1 mm,
4,8 mm, or 6,4 mm and a wall thickness
of 1,6 mm. All tubings are equipped with
a corresponding connector to connect the
customers tubing.
Part numbers of the pump heads can be
found at the end of the manual.
Features:
• Easy installation of pump head, stable
flow rate
• OLED high-definition display
• Digital speed control knob
• Power down memory function
• Scope of supply:
LLG-uni PERISTALTICPUMP 3, pump head,
tubing with connector
ID = 6.4 mm, OD = 9.6 mm