1 (8)
Intended for LK PE-X and PAL Universal Pipe with
premounted insert.
https://www.lksystems.se/en/products/lk-
universal/products/pipes/pe-x/
https://www.lksystems.se/en/products/lk-
universal/products/pipes/pal/
PE-X pipe-in-pipe system, including components
according to Installation solutions NT VVS 129,
is tested and approved according to NT VVS 129
and Sintef Test Method for conduits. Read more:
https://www.lksystems.se/en/support/documentation/
documentation-lk-universal/
LK Systems recommends that the wall box
should be connected with PE-X pipe. Please note
that connection with LK PAL Universal Pipe di-
mensions 16 and 20 and LK PE-X Universal Pipe
dimension 20 does not meet the requirements in
BBR for hidden positioned / inspectable joint
without service hatch.
Pressure class PN10
Assembly
LK Wallbox UNI Push can, due to its unique de-
sign, be assembled on a wall with at least 45 mm
studs, both in the back and the front edge of the
wall, depending on the method of construction.
The wallbox can also be assembled on the side of
a stud. Screws for mounting is included.
There are several accessories to get the correct c/c
distance between two wall boxes and mounting
them in different building materials.
LK Wallbox UNI Push AX16 V2 and AX20
EN.29.C.46.20200318
Assembly instructions | LK Wallbox UNI Push AX16 V2 and AX20
LK Wallbox UNI Push AX16 V2
Article no. 188 25 12
LK Wallbox UNI Push AX20
Article no. 188 25 22
See page 2
LK Wall Support Wallbox UNI
Push, c/c 160 and 150
Article no.188 07 42 and 188 07 43
See page 5.
LK Wall Support Flex Wallbox
UNI Push
Article no. 188 22 03
See page 6.
LK Wall Support Wallbox UNI
Push 150 N5
Article no. 188 22 95
See page 7.
LK Wallbox UNI Push Clamp
Article no. 188 11 04
See page 7.
LK Connection couplings
Article no. 188 18 45, 188 18 48
See page 8.
LK Potable Water System is
approved according to the
Nordtest method NT VVS 129.
TABLE OF CONTENTS