LK Floor Heating | Assembly Instructions | LK Room Temperature Control ICS-RF8
22
EN.33.C.104.1012
2. BUS – placing of a radio link
When multiple receiving devices are connected in a network only one radio link is used. The other units’ radio
links must be disconnected for the network to function. Place the radio link at the beginning or end of the
network. If necessary, a repeater can be used to improve the signal quality in large systems/long distance.
3. BUS – termination
Termination means that the networks start and end is specified. Place the “termination jumper" found left side
of receiver marked T as follows:
1. The networks first point corresponds to the receiver unit that is located first in the network. This unit
should have its radio link connected. Remove the “termination jumper” from this receiver unit .
2. The network's second endpoint corresponds to the receiver unit that is last in the network. Ensure that
jumper is in the right location (located next to T).
3. Other devices in the network must have their jumpers removed.
4. BUS – naming the receiver units
Each receiver unit must be named or numbered in order for communication to work.
Name the receiver units, as follows:
