Installation Instructions:
1. Begin by folding down the front windshield to provide yourself with adequate working
space and to avoid accidental damage or injury.
2. Position the front valance track on the bottom of the front roof support. The two
V-notches in the track should wrap around the roof support bolts if positioned correctly.
Secure the track with the supplied hex head self drilling screws in the 3 locations as
shown in figure 1-1.
3. Slide the front valance into the newly installed track.
4. Fold the front windshield back up to its original position.
5. The front valance is shipped with self adhesive Velcro attached to the bottom. Peel off
the plastic backing from the Velcro exposing the adhesive and apply the Velcro to the
bottom of the windshield flange.
Front Valance
Front Valance Track
Hex Head Self
Drilling Screws
Figure 1-1
Parts:
1-Front Valance
1-Front Valance Track
3-Hex Head Self Drilling Screws
LJ'S TOPS & BOTTOMS, Inc.
"Specializing in Golf Car Enclosures"
Ph: (561)736-7868 Fax: (561)375-9171
2
