Installation Instructions:
1. Begin by installing the Bag Par-Tector track in the roof. Position the track in the correct lo-
cation and secure it with 4 hex head self drilling screws as shown in figure 4-1.
2. Slide the Bag Par-Tector into the newly installed track.
3. Attach the Bag Par-Tector crossmember to the bag rack as shown in figure 4-2. Position the
crossmember on top of the bag rack and secure with the supplied hex head bolts. Please see
figure 4-3 and figure 4-4 for bolt configuration.
The Bag Par-Tector
Parts:
1-Bag Par-Tector
1-Bag Par-Tector Track
4-Hex Head Self Drilling Screws
2-Hex Head Bolt
2-Washers
2-O/S Washers
2-Lock Nuts
LJ'S TOPS & BOTTOMS, Inc.
"Specializing in Golf Car Enclosures"
Ph: (561)736-7868 Fax: (561)375-9171
Figure 4-1
The Bag Par-Tector Track
Hex Head Self Drilling Screws
The Bag Par-Tector Track
10
