LIW Rico RS, Руководство пользователя

Страница: 17 / 30

Rico RS Edition 1 page 17
13.2 Adjusting the height of the backrest
In order to adjust the height of the backrest Fig. 17 loosen the knobs (1) blocking the chest support, as well as the blocking
screws (2). Set the desired height of the backrest and then secure it by retightening the screws (2). Set the chest supports in their
proper position and retighten the screws (2) blocking the chest supports. The maximum extension of the backrest is marked by the
sign MAX. During extending the backrest and reaching the maximum of the permitted limit, the MAX sign is visible. It is non-
permissible to extend backrest above the MAX sign.
Fig. 17
13.3 Adjusting the height of the chest support
In order to adjust the height of the chest supports (2) loosen the knobs (1) Fig. 18 and then adjust the position of chest
supports (2). After setting the desired position of the supports, retighten the knobs (1), which block the movement of the chest
support. Position of the right and the left chest support is independent, and these chest supports may be adjusted individually.
Fig. 18
1 1
2
1
1
2
2