LIW MayorSIT Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 47

LIW MayorSIT Скачать руководство пользователя страница 4

Page 4 MayorSIT - ORTHOPAEDIC SEAT FOR CHILDREN, STABILISING THE BACK AND HEAD Edition 2

1

Introduction

Thank you for purchasing MayorSIT - orthopaedic seat for children, stabilising the back and head, by LIW Care Technology

Care Sp. z o.o. We are certain that the innovative device with advanced anatomical body adjustment features will improve the
comfort of work and leisure time for the user in a sitting position.

Developed by LIW Care Technology Sp. z o.o., the MayorSIT - orthopaedic seat for children stabilising the back and head

has been designed to provide an alternative to standard orthopaedic seats with limited anatomical adjustment ranges and
bespoke seats which perfectly map out the body curvatures, however, they do not give the opportunity to correct the user’s body
posture.

We ensured that the seat is as simple to use as possible while giving the opportunity to fit the anatomical shape of the

user, as well as correct the posture.

1.1

Warnings & Safety Information

For LIW Care Technology Sp. z o. o., the most important thing is to protect the patients who use our equipment. For

ensuring the safety of MayorSIT users, the following recommendations should be adopted:

1.

Please read the Instructions before the first use. In case any questions or doubts should arise, please contact your
dealer or the manufacturer.

2.

Please make sure that all the information, tips and warnings contained in these chapters are fully understood.

In these instructions for LIW Care Technology Sp. z o. o. products, you will find information marked with „NOTE!” symbol.
It is used to the draw reader’s particular attention to the text. It looks as follows:

UWAGA!

THE SYMBOL IS USED TO DRAW THE READER’S ATTENTION TO THE TEXT

WHICH IS MARKED WITH THIS SYMBOL. FAILURE TO COMPLY WITH THE INSTRUCTIONS
MAY ENDANGER THE HEALTH AND SAFETY OF THE USER OR IT MAY DAMAGE THE
PRODUCT.

2

Symbol meaning

Manufacturer’s name and date of manufacture

Serial Number

User’s permissible weight

Avoid contact with water

Note! Follow product instructions

Unlocking direction

Movement direction

Mark of conformity in accordance with EU Directive
93/42 EEC Annex. VII, concerning medical devices

«
...
2
3
4
5
6
...
»

Содержание MayorSIT
















































Отзывы:

Нет отзывов