LIW MayorSIT Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 47

LIW MayorSIT Скачать руководство пользователя страница 19

MayorSIT - ORTHOPAEDIC SEAT FOR CHILDREN, STABILISING THE BACK AND HEAD Edition 2

Page 19

Fig. 18

10.1.4.2

Parted footrests

NOTE!

AFTER FITTING THE FOOTRESTS, CHECK TO MAKE SURE THE FOOTREST RODS

HAVE NOT BEEN PULLED OUT THE SEAT PLATFORM FRAME AT THE MAXIMUM SETTING.
EXTREME FOOTREST SETTING MAY CAUSE THE FOOTREST TO LOSE ITS STABILITY AND
CAUSE DAMAGE.

NOTE!

WHEN THE FOOTRESTS ARE NOT INSTALLED, THE MOUNTING SLOTS MUST BE

SECURED WITH THE PLASTIC CAPS.

The frame has the facility to have parted footrests fitted on. To install the footrest (1) and (2), remove the caps (3) from the

seat frame rods (5), undo the locking bolts (4) to allow sliding the rods in to the mounting slots easily. After setting the footrest in
the required position, retighten the locking bolts (4) so that footrests (1) and (2) stay in place. The maximum setting of the
footrests is marked with a sign on the footrest rod. Remember to replace the caps (3) in the rods after dismantling the footrests.

Fig. 19

«
...
17
18
19
20
21
...
»

Содержание MayorSIT
















































Отзывы:

Нет отзывов