LIW Baffin.1, Руководство пользователя, Страница: 26 / 62

Baffin.1 Edition 5 25
set the desired height of the footrest and screw the knobs. The height of the
footrest depends on the length o
f child’s lower limbs.
To adjust the tilt angle of the footrest platform, the metal screws (6)
should be unscrew (fork spanner size 10 is required ). Set the right angle and
screw it (6). It is possible to adjust the footrest angle in the range: 0
°÷20°
For stability of the footrest you should adjust the threaded rods (8) to the
height of your vehicle‘s floor. Begin by releasing the locking ring at the top
end of the threaded rod (7) and then set the correct height by turning the
threaded rod (you need t
o reach the vehicle‘s floor). CORRECT position is
when plastic ends of the threaded rods lie on the vehicle’s floor. Make sure
that the threaded rods are not over-extended – the rotating platform and
Baffin.1 seat should always lie flat on the vehicle‘s se at. Now lock the
threaded rod by twisting the upper locking ring upwards. This prevents any
accidental unscrewing of the threaded rods.
Fig. 43
WARNING: It is forbidden to stand on the footrest.
Child can only rest the feet on it.