Livox LIVOX LIDAR AVIA, Руководство пользователя, Страница: 11 / 24

Livox Avia User Manual
©
2020 Livox Tech. All Rights Reserved.
11
Mounting Notice
Read and understand the following warnings before mounting the Avia.
1. Before use, remove the screen protector from the optical window.
2. Significant dust and stains on the optical window will affect the performance of the Avia LiDAR sensor.
Follow the instructions in the Maintenance section to clean the optical window using compressed air,
isopropyl alcohol, or a lens cloth.
3. When mounting the Avia, the field of view must not be blocked by any object, including glass. Refer to
Figure 3.1.1.
4. There are no restrictions on which direction the Avia can be installed. The top or bottom surface can be
used to mount the Avia. It is recommended that the surface is parallel to the ground when mounting.
5. The Avia cannot bear any extra payload. Otherwise, the reliability of the product cannot be guaranteed.
Dimensions
Refer to the dimensions and the mounting holes in the diagrams below to mount or embed the Avia to or in an
appropriate place on the target base using M3 screws. Since the top and bottom sides as well as the left and
right sides of the Avia are symmetric to the optical axis, the Avia can be mounted using any of these sides.
The Avia can also be mounted or embedded to or in an appropriate place on a mounting bracket (not included).
Figure 3.3.1 Livox Avia Dimensions (refer to Appendix 1)
Unit: mm
32.40
64.80
61.20
75.55
20.00
65.00
46.00
31.90
13.50
91.00
20.00 34.00
6.00 79.00
46.00
16-M3
32.40
4
65.00
20.00
46.00
20.00 34.00 2.00
4.00
+0.05
0
1.4
4.00
+0.05
0
1.4
32.40
64.80
61.20
75.55
20.00
65.00
46.00
31.90
13.50
91.00
20.00 34.00
6.00 79.00
46.00
16-M3
32.40
4
65.00
20.00
46.00
20.00 34.00 2.00
4.00
+0.05
0
1.4
4.00
+0.05
0
1.4