4798/4799
SEDONA TWIN
CASTER BED
00165
PARTS LIST:
A)
8 -4 1/4" Lag Bolts
B)
8 -Black Steel Washers
C)
2 -End Assemblies
D)
2 –5 1/4" x 75" Mattress Rails w/Support Cleats
E)
3 -3 1/2" x 38
3/4
" Mattress Supports
F)
10
-1 1/4" Wood Screws
G)
4 -Casters with
4 plastic
inserts
TOOLS REQUIRED:
1)
7/16" Wrench or Socket Wrench
2)
Phillips Head Screwdriver
Make sure you have all parts before beginning assembly. If you need a part, contact
Living Spaces.
1)
Attach two mattress rails (D) to end assemblies(C) with 8 lag bolts and 8 washers, and
tighten. The height
of the mattress rails is adjustable.
2)
Roll out Slat Kit and stretch from end to end. Secure with 4 wood screws, on the ends of each of the
outermost slats, one in each corner of the bed. Center 3 individual slats in the 3 gaps built into the Slat
kit and secure with 6 wood screws, one at each end of the individual slats.
3)
Seat caster inserts fully in bottom of end assemblies, and snap casters in place
by pressing the metal posts
into the plastic inserts in the bottom of ends.
4)
Add
mattress and sleep well!
Recommended: Electric driver with 7/16" socket
