Living Flame Eastside Euro, Руководство по установке

Страница: 23 / 62

INSTALLATION OF FIXED LOG SET
DIFFUSER BURNER
Only the logs and embers supplied with this fire may be used on this fire and said logs and
embers may not be used on any other brand of fire.
The fire has a handful of the embers supplied lightly scattered over the fire bed blanket.
Place the fixed log set on the ember bed.
Gently settle the frame of the fixed log set into the embers, ensuring that the metal frame is
not visible.
When the fire is set correctly the flames should be peaking at approximately 75mm – 100mm
on high and 25mm – 35mm on low.
INSTALLATION OF COTSWOLD EFFECT
DIFFUSER BURNER
Only the Cotswold Stone, Logs and embers supplied with this fire may be used on this fire
and `not be used on any other brand of fire.
The fire has a handful of the supplied embers lightly scattered over the fire bed blanket.
Place the ice or pebble effect evenly over the ember bed to a depth of approximately 25mm.
Ensure that they are evenly distributed to create an even flame pattern.
When the fire is set correctly the flames should be peaking at approximately 75mm – 100mm
on high and 25mm – 35mm on low.
INSTALLATION OF COTSWOLD STONE EFFECT
STRIP BURNER
Only the Cotswold Stones and embers supplied with this fire may be used on this fire and
said Cotswold Stones and embers may not be used on any other brand of fire.
The strip burner does not have a fire bed blanket
The fire has embers filled to approximately 15mm deep over the fire strip length.
Ensure that the embers are filled to the edge of the pilot frame but are not in or on the pilot.
Place the Cotswold Stone effect evenly over the ember bed to a depth of approximately
25mm.
Ensure that they are evenly distributed to create an even flame pattern.
When the fire is set correctly the flames should be peaking at approximately 75mm – 100mm
on high and 25mm – 35mm on low.