Living & Co YF-ST1638, Инструкция по эксплуатации, Страница: 4 / 16

3
1300 886 649 AU
Important Safety Instructions
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Electrical safety and cord handling
·
·
·
·
Protect the power cord:
* Do not operate the fan with the cord coiled up; always fully unwind.
* Do not twist or kink the cord or let it touch heated surfaces.
* Do not put any stress on the cord where it connects to the product.
* Never carry the fan by the cord.
* Arrange the cord away from any traffic area so no one will trip over it.
* Do not run the cord under carpeting or cover it with rugs or runners.
·
·
·
3
Read this manual thoroughly before first use, even if you are familiar with this
type of product. The safety precautions enclosed herein reduce the risk of
fire,electric shock and injury when correctly adhered to. Make sure you
understand all instructions and warnings. Keep the manual in a safe place for
future reference, along with any warranty information, your purchase receipt and
the original packaging carton. If you sell or transfer ownership of this product,pass
on these instructions to the new owner. Always follow basic safety precautions
and accident prevention measures when using an electrical appliance,
including the following:
Voltage: Make sure your outlet voltage and circuit frequency correspond to
the voltage stated on the rating label. If this is not the case, do not use the fan.
Water: To protect against fire and electric shock, do not immerse the
cord, plug or the fan itself in water or other liquids, or expose the electrical
connections to water. Ensure your hands are dry before handling the plug or
switching on the appliance. Do not use the fan outdoors or on wet surfaces.
Protect it from liquid spills.
Damage: Check the power cord regularly for visible damage. If the cord is
damaged, it must be replaced by the manufacturer, its authorised service
centres or appropriately qualified personnel in order to avoid any hazards.
WARNING! Do not pick up or operate the appliance if the power supply cord,
plug or housing is damaged, or after it malfunctions or has been dropped
or damaged in any manner. In case of damage, contact our after sales
support line for advice.
WARNING! No extension cord: Do not use the fan with an extension cord, plug
adaptor, external timer or solid-state speed control device.
Connection: To insert the plug, grasp it firmly and guide it into outlet.
Disconnection: Switch off and unplug the fan from the power outlet when it
is not in use, during lightning storms and before cleaning, servicing, moving or
storing the fan. Grasp the plug and remove it from the outlet, do not pull the cord
when disconnecting.